The correct way to clean the bearings

       1. Regular cleaning is very important in the process of using imported bearings. How to properly clean imported bearings? When the imported bearings are first removed for inspection, the appearance records are first recorded by photography. Also, verify the amount of lubricant remaining and sample the lubricant before cleaning the bearings.

       2. The cleaning of the bearing is carried out by rough washing and fine washing, and a metal mesh frame can be placed on the bottom of the used container.

       3. When rough washing, remove grease or adhesive with a brush or the like in the oil. At this time, if the bearing is rotated in the oil, be careful that the rolling surface will be damaged by foreign matter or the like.

       4. When fine washing, slowly rotate the bearing in the oil, and it must be carried out carefully.

       5. The commonly used cleaning agent is neutral non-aqueous diesel or kerosene, and sometimes a warm alkali solution is used as needed. Regardless of which cleaning agent is used, it is often filtered and kept clean.

       6. Immediately after cleaning, apply anti-rust oil or anti-rust grease to the imported bearings.

For more information and purchase please visit: https://www.supplyforever.com

How to properly handle NSK imported bearings

     Due to the high precision mechanical parts of the rolling bearings, they must be handled accordingly. Even if the use of high-quality NSK bearings is not properly handled, its expected benefits will not be realized.
The main precautions should be observed as follows:

Keep NSK imported bearings and surrounding areas clean
Dust and dirt, even if the eyes are invisible to the naked eye, have a detrimental effect on the bearing. To prevent dust and dirt from bearing and keep its environment clean as an entry point.
Handle with care
Handling heavy impacts can cause bearings to be scratched or damaged and can cause their failure. Too strong impact can cause damage or cracks.
Use the right tools
Always use appropriate equipment to handle NSK bearings and avoid general purpose tools.
Corrosion protection
Due to the sweat of hands and other various contaminants, it may cause corrosion, keep hands clean, and then handle NSK bearings. Wear gloves if possible. Pay attention to the corrosive gas of the rustproof bearing.

For more information and purchase please visit: https://www.supplyforever.com