Many people know that in the engraving industry, machine coverage has basically been achieved, rather than manual engraving as in the traditional. The products carved out by the machine are more efficient and cost less to invest, especially in the stone industry. The use of stone engraving machines is very extensive. However, here you need to tell everyone that not all materials can be engraved with stone engraving machines.
Stone engraving machine manufacturers generally tell customers when they sell products, they can apply those materials, but many people will ignore this. In fact, if you use materials that are not suitable for the engraving machine, it will cause great damage to the engraving machine and the machine tool, and even break the knife.
At present, various engraving machines on the market can use different materials, but most of them are similar. On hard materials, materials such as marble, granite and bluestone can be used. Materials that are slightly softer than these, such as ceramics, glass, etc., are also possible. However, depending on the hardness of the material, the depth of the engraving is different. For example, if it is a hard material such as granite, it can be engraved to a thickness of about five millimeters in batches, and the slightly softer material of marble can be carved to five millimeters at a time.
