First, the engraving materials and tools must match
Different carving materials are required for different engraving materials. For example, carving a stone with a knife that engraves wood, the carving material is too hard, but the tool is too soft, and the knife is strange! Therefore, you must express your use to the customer service before purchasing the tool. If there is any difference in the processing materials during the production process, please change the tool in time.
Second, the speed and depth of the engraving machine should be suitable
When processing hard materials, be sure to slow down, layer engraving, and lower the knife layer by layer, so as to avoid the tool from being unable to withstand the break.
Third, the tool is installed correctly, in place
Many customers do not fully understand the installation of the tool. When the tool is not installed, the engraving machine is started to work. If the tool is not vertical, it is easy to cause the knife to break.
Fourth, check the tool holder is clean
If the tool jaw is not clean, the tool will not be installed properly, and the tool installation will be inaccurate and not vertical. Especially woodworking engraving machines are more prone to such situations.
Fifth, the working conditions must be guaranteed
When the engraving machine is working, there should be no source around it. The power supply used by the engraving machine should keep the voltage stable. Good working conditions are the guarantee of effective work!
