1, breakpoint memory function, specify the starting position segment number
This function can be used to continue the engraving work when your equipment suddenly loses power (or if the knife is broken, or if half of the material being processed is not finished, or where further processing is required).
2, you can program yourself
You can directly edit some simple programs to test the performance of the device, or you can call the advanced users to special needs.
3, optimized the arc command
Make your engraving as fast as a straight line, smooth cut surface
After the arc command is used, the engraving curve is faster and smoother, the relief effect is better, and there is no pause during the engraving process.
4, you can directly edit the raw G code
When the G code made by the user needs further modification, it can be directly read (opened in the WINDWS Notepad format), which is convenient for your operation on the file.
5, processing timing
This program greatly facilitates the choice of your engraving machine. You can compare and compare the pieces of the same workpiece, and then choose the product you are satisfied with. If you need to mass produce the product, you can budget your processing time and help. You choose the most efficient machining mode.
6, display processing trajectory and simulation
Simulate the simulation of your layout file and analyze whether the process is reasonable. This is the simulation function. The features of this function are:
1. Visually display the processing process of the tool, observe the processing effect, and pre-examine the rationality of the processing effect, thereby reducing the trial cutting process and reducing the bottom processing cost.
2. The processing plan can be evaluated to help you choose a reasonable processing technology.
